How to Use Iron-On Patches: A Step-by-Step Guide

Iron-on patches are a quick and easy way to personalize your clothing, fix small holes, or add some flair to your wardrobe. If you're wondering how to apply them correctly, you're in the right place! The best part? You don't need any fancy equipment—just a regular iron will do! Here's how to get started:

What You’ll Need:

• Iron-on patches
• A regular household iron
• An ironing board (or a hard, flat surface)
• A cloth or parchment paper

Step-by-Step Instructions:

1. Prep Your Garment: Start by ensuring your fabric is clean and dry. Any wrinkles should be smoothed out before applying the patch, so give it a quick iron to ensure a flat surface.
2. Position the Patch: Place the patch on the desired spot, shiny side down (if the patch has a shiny backing). Make sure it's centered or aligned how you want it.
3. Set the Iron: Set your iron to medium heat (usually around 300°F or 150°C). Avoid using steam, as it can interfere with the adhesive. If your iron has a fabric setting, choose one that’s appropriate for the material you’re working with (cotton or denim, for example).
4. Cover with Cloth: Place a thin cloth or parchment paper over the patch. This will protect both the patch and your iron from any adhesive that might seep through.
5. Iron the Patch: Press the hot iron down firmly on the patch for about 30 seconds to a minute. Make sure you apply even pressure and don't move the iron around—just let it sit in place. For larger patches, you may need to move the iron around to cover all edges.
6. Cool Down: Once the patch is secured, let it cool completely before handling.
   

Watch Video Herr: Link